The optical fiber unit is positioned in the centre. Two parallel Fiber Reinforced Plastics (FRP) or steel wires or KFRP are placed at the two sides. Then another FRP as the additional strength member is also applied. Then the cable is completed with a grey or black LSZH sheath.
G.657A2（Fujikura Joint-venture Manufacture or Draka）
1 （ Colored Green）
（2.0± 0.1 mm）H × （5.3 ± 0.3 mm）W
Low Friction LSZH - Low smoke zero halogen
@ 1310 nm
≤ 0.40 dB/km
@ 1550 nm
≤ 0.30 dB/km
Mechanical and environmental characteristics
Min. Bend Radius（Dynamic）
Min. Bend Radius（Static）
Transport &Storage temperature
Install the temperature
1.Special Low-bend-sensitivity fiber provides high bandwidth and excellent communication transmission property.
2.Two parallel FRP or KFRP or steel wire as strength memners ensure good performance of crush resistance to protect the fiber.
3.Aramid yarn as the traditional strength member ensures god performance of tensile strength.
4.Simple structure,light weight and high practicablity.
5.Novel flute design, easily strip and splice,simplity the installation and maintenance.
6. Low smoke, zero halogen and flame retardant Low friction sheath.
1. Access network , fiber to the home
2. Support the Internet , CATV , telephone and more network service in the future.