Outdoor Hybrid DC Fiber Patch Cable 16awg Wire Armored Outdoor Duplex LC/UPC Fiber 18" Breakout On Both Ends FTTA Patch Cord

Outdoor Hybrid DC Fiber Patch Cable 16awg Wire Armored Outdoor Duplex LC/UPC Fiber 18" Breakout On Both Ends FTTA Patch Cord
Outdoor Hybrid DC Fiber Patch Cable 16awg Wire Armored Outdoor Duplex LC/UPC Fiber 18" Breakout On Both Ends FTTA Patch CordOutdoor Hybrid DC Fiber Patch Cable 16awg Wire Armored Outdoor Duplex LC/UPC Fiber 18" Breakout On Both Ends FTTA Patch CordOutdoor Hybrid DC Fiber Patch Cable 16awg Wire Armored Outdoor Duplex LC/UPC Fiber 18" Breakout On Both Ends FTTA Patch CordOutdoor Hybrid DC Fiber Patch Cable 16awg Wire Armored Outdoor Duplex LC/UPC Fiber 18" Breakout On Both Ends FTTA Patch CordOutdoor Hybrid DC Fiber Patch Cable 16awg Wire Armored Outdoor Duplex LC/UPC Fiber 18" Breakout On Both Ends FTTA Patch Cord
CategoriesPatch cord/ pigtail
BrandRUX
ModelHybrid Fiber and Power Patch Cord
Fiber TypeG657A2
Jacket MaterialLSZH
Installation Temperature-10~+65
Operating Temperature-40~+75
Connector 1LC/UPC uniboot with pull rod
Connector 2LC/UPC
FOB portShenzhen
Terms of PaymentL/C, Western Union, MoneyGram, T/T, Paypal
Download
Update TimeNov 14,2024
Detail Information
Description

Outdoor Hybrid DC Fiber Patch Cable 16awg Wire Armored Outdoor Duplex LC/UPC Fiber 18" Breakout On Both Ends Patch Cord

This hybrid cable assembly is used to connect both fiber and power to a radio element. This cable is specifically design to work with many popular radio models that are powered by 48vdc and have fiber interfaces.

This type of hybrid cable cuts down on installation time and reduces opportunity for installer error.

This hybrid cable is part of the Specialized hybrid power and fiber system that includes a hybrid trunk cable, a distribution enclosure and these hybrid jumper cables.

Both ends of the electrical conductors are terminated with a flat ferrule that makes it very easy to connect the DC terminal while installing in the field.

For the fiber connectors, one side of the cable has a ruggedized uniboot duplex LC connector that is specifically designed to be installed within a cable gland protector on the radio element. The other side of the cable has a more flexible but armored tail that has a standard duplex LC connector that can be separate should the installer need to roll polarities.

Technical Data
ITEM
Technical Parameters
Fiber Type
G657A2
Mode field diameter at 1310um
8.6~9.5±0.4 μm
Cladding diameter
125.0±0.7 μm
Core concentricity error
≤0.5 μm
Cladding non-circularity
≤1.0 %
Zero dispersion wavelength
1300nm ~ 1324nm
Zero dispersion slope
≤0.092 ps/(nm²·km)
Cable cut-off wavelength
≤1260 nm
Proof stress
≥0.69 Gpa
Polarization mode dispersion
≤0.2 ps/km
Products Features
* 2 Core Single Mode Fiber G657A2
* PE Black Jacket, UV Protected and Riser Rated
* Can be used indoors and outdoors
* A-Side Termination: Ruggedized Uniboot Duplex LC Connector
* B-Side Termination: Duplex LC Connector
Application
* FTTA
Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
My status